|Dimensions||10 × 6 × 10 in|
Eliminate wheel hop and maximize castor for increased high speed stability with the Password:JDM / PCI (Pro Car Innovations) Front LCA Spherical Bearing Kit! Like any spherical bearing that is to be used in a suspension system, the reason is to eliminate deflection. Rubber or urethane bushings will deflect (compress) under load leading to unwanted camber and toe changes. The more modified the suspension, engine, brakes, bigger stickier tires all lead to higher suspension loads thus more deflection and unwanted camber and toe changes. This makes the car unpredictable and unstable at high speeds and less responsive to driver input.
Eliminating deflection on the front lower arm is very important to the handling of your car; the front lower arm carries the most loads of all the control arms under braking, accelerating, cornering, and launching. This product will have the same effect as traction bars, by reducing or eliminating wheel hop. Only by using a spherical bearing at this very critical part of the suspension can all deflection be eliminated. The Password:JDM / PCI spherical bearing kit is offset to maximize castor for increase high speed stability and added camber on turn in.
The bearing housings are cnc machined from 6061 aluminum, and anodized. The spacers (high misalignments) are cnc machined from 4130 steel, and zinc plated. PCI warranties the product for up to 2 years from manufacturer defects.
This product requires no maintenance. Recommend inspection every 6 months or 15000 miles by lightly hitting the arm with a rubber hammer to check for bearing play. There should be no play or noise. Early detection of play will prevent damage to the aluminum housing and spacers. Bearings can be replaced if needed, snap ring pliers are required for removal of the bearings. Over 100,000 miles of on road testing has showed no need for replacing.
– 2006-2011 Honda Civic
PCI also now offers professional installation for additional $50 charge just by shipping your factory arms to them for installation.
|Dimensions||10 × 6 × 10 in|
One pair of brand new JDM Soshinoya (New Driver) Badges! These badges symbolize the driver’s level of experience! This is a must have for all the die-hard JDM enthusiasts out there!
These JDM Soshinoya Badges are available in “Suction Cup Style” and “Magnetic Style”. The “Suction Cup Style” badges can be mounted on any interior window! The “Magnetic Style” badges can be placed anywhere on the exterior of your vehicle!
Option 1 – Includes one suction cup type, and one magnetic type badge.
Option 2 – Includes two suction cup type badges.
**Please note pictured is option 1.
We proudly present the Password:JDM License Plate Frames! People will break their necks when they see you with these Password:JDM License Plate Frames on your ride! Whether you are at a meet, a show or just cruisin’ the streets. People will notice you and your ride. Just like the rest of the Password:JDM product lineup, these frames are made to last!
This set comes complete with front and rear license plate frames, and the PasswordJDM Decal Pack.
The cooling system is a vital component of a vehicles operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed our line of Aluminum Radiator Cooling Plates to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.
The Password:JDM Aluminum Cooling Plate for the DC 94-01 Integra with JDM Front End is constructed from high quality aluminum, and then finished in a high-density epoxy coating proprietary to Password:JDM. This coating provides a long lasting, durable finish that cannot be found anywhere else!
This will only fit vehicles equipped with the JDM front end conversion.
Install your JDM city lights or side markers with ease! Introducing, the Password:JDM Wiring Harness. The kit has two “brown plugs” that connect to the socket and 7 feet of wiring attached. (this wire kit fits all EG, EK, DC, BB models, will not fit EF model)
NOTE – This is only the actual city light/side marker wiring and plugs. No sidemarkers or city light sockets are included at this price!